SCSI priključki

Starte provide all kinds of SCSI Connector, such as SCSI 20/26/36/50/68/100 and VHDCI 68 for cable and PCB

  • 1.0mm nagib 26 pin VHDCI moški SCSI priključek

    Začetek koraka 1,0 mm 26 pin VHDCI moški priključek SCSI Pin je razporejen v dveh vrstah, vsaka vrstica ima 13 pin.Ta VHDCI 26 pin konektor se običajno uporablja s standardnim SCSI 26 zatičem zaščitena žica(Naš je UL2990 28AWG*13 parov+al-folija+pletenica+odtočna žica), in združljiv z datotečnimi strežniki / Omrežna oprema.

  • 10150 MDR50 Pin Servo Drive Connector

    10150 MDR50 Pin Servo Drive Connector

    Začni 10150 MDR50 Pin Servo Drive Connector with latch clip and plastic hood is replacement of 3M Mini Delta Ribbon 10150-3000PE MDR and 10350-52F0-008 MDR50 pin connector. Used to make HPCN 50 zaklenjen z vijakom, then onnect servo Driver, SCSI Card and Motion Controller.

  • 135 Degree Angled SCSI MDR36 pin Servo Connector

    Začni 135 Degree Angled SCSI MDR36 pin Servo Connectorwith Metal Cover, IDC type with clip is usually used with Standard SCSI 36 pin double shielded wire (Staret UL2290 28AWG*18Pairs+Al-foil+Braid+Drain wire). Then link Mini Delta Ribbon (MDR) 36-Pin Breakout Board In a limit space.

  • 26 pin VHDCI SCSI konektor z nagibom 0,8 mm

    26 pin VHDCI SCSI konektor z nagibom 0,8 mm

    Začni 26 pin 0,8 mm razmak VHDCI SCSI konektor s kovinskim pokrovom razporeditev nožic je v dveh vrstah, vsaka vrstica ima 13 zatiči. Uporablja se na tiskani vezni plošči industrijske opreme ali PCI plošči z VHDCI 26 pin ženski konektor.

  • 36 Pin SCSI MDR Wire Mount Male Connector

    Začni 36 Pin SCSI MDR Wire Mount Male Connector pin arrangement is in two rows, vsaka vrstica ima 18 zatiči. This type MDR36 pin connector is similar with 3M Mini Delta Ribbon 36 pin priključek, and commonly used to make MDR36 pin cable, then link SCSI 36 Pin Servo Connectors Terminal Blocks Breakout Board and parallel printers.

  • 3M 10326 zaklenjen z vijakom 26 Pin Solder Connector

    Starte 3M 10326 zaklenjen z vijakom 26 Pin Solder Connector with Screw is solder type and locked by thumbscrew, not latch clip. This MDR26 pin SCSI cable Connector is always used with Standard SCSI MDR36 pin shielded wire(Starte UL2990 28AWG*13Pairs+Al-foil+Braid+Drain wire), and used to link SCSI Servo Data Device which equipped with MDR 26 pin ženski konektor.

  • 90 stopnjo 68 Pin SCSI Solder Connector with Latch

    90 stopnjo 68 Pin SCSI Solder Connector

    To 90 degree angled High density 68 pin SCSI Male Connector include Solder Type 68 pin SCSI Male Connector and right angle 68 pin SCSI Connector metal cover with latch clip. Used to make 90 degree SCSI 68 zaklenjen z vijakom. Compatible with industrial and power control, medical equipment, automotive electronics.

  • 90 degree MDR36 Pin Female Connector

    90 degree MDR36 Pin Female Connector

    Začni 90 degree 10236-5212PL MDR36 Pin Female Connector with latch bracket has a 0.050 palec (1.27 mm) višina tona, and has 18 pins arrangement in two rows. This DIP type MDR36 pin female connector is often used on SCSI CN 36 Pin Servo Breakout Board. Compatible with Parallel Printer Device.

  • 90 degree MDR50 pin male SCSI Cable Connector

    Začni 90 degree MDR50 pin male SCSI Cable Connector with Latch Clip metal hood. To 90 degree IDC type SCSI MDR 50 Pin Cable Connector with latch clip is a type of MDR50 pin SCSI Connector and locked by latch clip. Always made with standard SCSI 50 pin zaščitena žica (Starte UL2990 28AWG*25Pairs+Al-foil+Drain wire+Braid, copper). Then connect SCSI Hard Disk Drive with CN50 female connector or Motion Controller with CN50 female connector.

  • 90 stopnje VHDCI 26Pin ženski SCSI PCB priključek

    Začni 90 stopnja VHDCI 26Pin ženski SCSI PCB konektor je 1,0 mm naklon VHDCI konektor, ni običajen priključek VHDCI z razmikom 0,80 mm, pogosto uporablja v komunikacijski industriji in telekomunikacijski industriji.

  • DB 68 pin SCSI Solder Connector with screwDB 68 pin SCSI Solder Connector with screw

    DB 68 pin SCSI Solder Connector with screw

    Starte DB 68 pin SCSI Solder Connector with screw and metal hood. This Solder type DB 68 pin SCSI Connector with Screw is usually sued with Starte Standard 68 PIN SCSI shielded wires, then linked with Mass storage machines,Osebni računalniki in računalniki Mac ter več zunanjih naprav.

  • HPCN 100 pin SCSI-II Connector with Metal Cover

    HPCN 100 pin SCSI-II Connector with Metal Cover

    Starte HPCN 100 pin SCSI-II Connector with Metal Cover is always used with standard SCSI 100 pin shielded wire to make a 100 pin SCSI Cable assembly. Then link USB Modular Digital I/O module with SCSI interface, 100 Pin SCSI-II Screw Terminal Block.