Cavo di rilevamento automatico UART TTL seriale da USB a 3,3 V 5 V
Il cavo di rilevamento automatico UART TTL seriale da USB a 3,3 V 5 V è un cavo da USB a 5 Pin TTL Header cavo assegnato, che può essere utilizzato per il collegamento diretto alla scheda dal Bus USB. L'elettronica di supporto rileva automaticamente la tensione per il suo funzionamento. Le luci LED di trasmissione e ricezione sono incorporate nella giacca sagomata USB traslucida.
- Descrizione
- Modulo di richiesta
Cavo di rilevamento automatico UART TTL seriale da USB a 3,3 V 5 V
Starte USB to 3.3V 5V Serial UART TTL Auto Sensing Cable. Also named 3.3V 5V USB to UART TTL Auto Sensing Cable. It is a USB to 5 Pin TTL Header cavo assegnato, which can direct connection to the board from the USB Bus. L'elettronica di supporto rileva automaticamente la tensione per il suo funzionamento. Le luci LED di trasmissione e ricezione sono incorporate nella giacca sagomata USB traslucida.
Parametri del prodotto di 5V USB to TTL Auto sensing Serial UART Cable:
Articolo | Cavo di rilevamento automatico UART TTL seriale da USB a 3,3 V 5 V |
Marca | Inizio |
Modello numero. | U2CA014 |
Tipo di cavo | Cavo seriale TTL-232R-5V da USB a TTL UART |
Connettore 1 | USB 2.0 connettore maschio |
Connettore 2 | 5 Pin TTL Header connector |
Chipset | Cavo seriale TTL-232R-5V da USB a TTL UART |
Cavo seriale TTL-232R-5V da USB a TTL UART | 1 |
Cavo seriale TTL-232R-5V da USB a TTL UART | 5 |
Cavo seriale TTL-232R-5V da USB a TTL UART | 3 Mbaud |
Versione USB | 1.1 o 2.0 conforme |
Alimentazione esterna | Non c'è bisogno |
Colore | Nero |
Campione | Permesso |
MOQ | 500 pezzi |
Garanzia | Due anni |
OEM | Supporto |
Caratteristica di USB to 3.3V / 5V TTL Auto sensing Cable
1)Single board USB to asynchronous serial data transfer interface
2)UHCI / OHCI / EHCI host controller compatible
3)Utilizes newest FTDI FT232QR chip
4)Cavo seriale TTL-232R-5V da USB a TTL UART 7 o 8 Cavo seriale TTL-232R-5V da USB a TTL UART, 1 o 2 Cavo seriale TTL-232R-5V da USB a TTL UART / Cavo seriale TTL-232R-5V da USB a TTL UART / Cavo seriale TTL-232R-5V da USB a TTL UART / Cavo seriale TTL-232R-5V da USB a TTL UART / Cavo seriale TTL-232R-5V da USB a TTL UART
5)Entire USB protocol handled by the electronics in the cable USB
6)Velocità di trasferimento dati da 300 baud a 3 Mbaud a livelli TTL, Auto Voltage sensing
Applicazione di USB to Serial UART TTL Auto level adapter Cable:
This USB to 3.3V 5V Serial UART TTL Auto Sensing Cable is suitable for connection to your computer through an existing USB port. Uses it as an available regular serial communication port. Protocol for all USB is handled within this adapter, there is no other device or programming required.