USBから3.3V5VシリアルUARTTTL自動検知ケーブル
Starte USB to 3.3V 5V Serial UART TTL Auto Sensing Cable is USB to 3.3V 5V Serial UART TTL Auto Sensing Cable is USB to 3.3V 5V Serial UART TTL Auto Sensing Cable 5 ピンTTLヘッダー割り当てケーブル, USBバスからボードへの直接接続に使用できます. サポート電子機器は、その動作のために電圧を自動的に感知します. 送信および受信LEDライトは半透明のUSB成形ジャケットに埋め込まれています.
- 説明
- 照会フォーム
USBから3.3V5VシリアルUARTTTL自動検知ケーブル
Starte USB to 3.3V 5V Serial UART TTL Auto Sensing Cable. Also named 3.3V 5V USB to UART TTL Auto Sensing Cable. It is a USB to 5 ピンTTLヘッダー割り当てケーブル, which can direct connection to the board from the USB Bus. サポート電子機器は、その動作のために電圧を自動的に感知します. 送信および受信LEDライトは半透明のUSB成形ジャケットに埋め込まれています.
の製品パラメータ 5V USB to TTL Auto sensing Serial UART Cable:
項目 | USBから3.3V5VシリアルUARTTTL自動検知ケーブル |
ブランド | 開始 |
モデル番号. | U2CA014 |
ケーブルタイプ | USB to TTL cable |
コネクタ 1 | USB 2.0 オスコネクタ |
コネクタ 2 | 5 Pin TTL Header connector |
チップセット | FTDIチップセット |
Number of Channels | 1 |
Number of Conductors | 5 |
Baud Rate | 3 Mbaud |
USBバージョン | 1.1 また 2.0 準拠 |
外部電源 | 必要なし |
色 | ブラック |
サンプル | 許可された |
MOQ | 500 pcs |
保証 | 2年 |
OEM | サポート |
の特徴 USB to 3.3V / 5V TTL Auto sensing Cable
1)Single board USB to asynchronous serial data transfer interface
2)UHCI / OHCI / EHCI host controller compatible
3)Utilizes newest FTDI FT232QR chip
4)UARTインターフェースのサポート 7 また 8 データビット, 1 また 2 ストップビットと奇数 / 平 / マーク / スペース / パリティなし
5)Entire USB protocol handled by the electronics in the cable USB
6)Data transfer rates from 300 baud to 3 Mbaud at TTL levels, Auto Voltage sensing
の適用 USB to Serial UART TTL Auto level adapter Cable:
This USB to 3.3V 5V Serial UART TTL Auto Sensing Cable is suitable for connection to your computer through an existing USB port. Uses it as an available regular serial communication port. Protocol for all USB is handled within this adapter, there is no other device or programming required.