MDR14 pin plug SCSI Solder Connector with latch clip

MDR14 pin plug SCSI Solder Connector

Starte MDR14 pin plug SCSI Solder Connector with Latch and plastic shell is solder type connector and locked by by latch clip, not by screw. Which is used with standard SCSI 14 pin shielded wire (Starte UL2990 28AWG*7 Pairs+Al-foil+Braid+Drain wire), then link SCSI Servo device, SCSI Hard Disk and other PCB board which equipped with SCSI 14 conector pin feminin.

Descriere
Formular de interogare

MDR14 pin plug SCSI Solder Connector

Starte MDR14 pin plug SCSI Solder Connector with Latch and plastic shell. Acest 14 pin solder SCSI connector with plastic hood is solder type connector and locked by by latch clip, not by screw. This connector can use with standard SCSI 14 pin shielded wire (Starte UL2990 28AWG*7 Pairs+Al-foil+Braid+Drain wire). Suitable with SCSI Servo device, SCSI Hard Disk and other PCB board which equipped with SCSI 14 conector pin feminin.

Product Parameters of MDR14 pin Connecto r with push botton:

Articol	MDR14 pin plug SCSI Solder Connector
Marca	start
Tip produs	14 Conector pin SCSI
Nu. De contact	14 pin
numarul modelului.	SCCA004
Tipul de contact	Solder Type 1.27mm cable receptacles Connector
Opțiuni	Masculin, latch, Asamblare
Sârmă	28Suport AWG sau 30AWG
Contact Finisaje	5u Gold Selective Plating
MOQ	1 PCS
Probă	Liber
Pachet	Genți
Garanție	Doi ani

Technical Parameters of solder type MDR14 pin male SCSI Connector:

Material conector
Locuințe	Plastic termoplastic P.B.T UL94V-0, Negru
Contacte	Aliaj de cupru placat cu aur
Shell frontal	Oţel, Nichelat peste cupru
Material de acoperire din plastic
Hood	Plastic termoplastic P.B.T UL94V-0
Coaja interioară	Oţel, Nichelat peste cupru
Zăvor & Hood:	Oţel inoxidabil & Plastic ABS UL94V-0
Capota de intrare	Plastic ABS UL94V-0
Caracteristici electrice
Contactați evaluarea curentă	1.0 Amp
Tensiune de rezistență dielectrică	500V AC
Resiztenta izolarii	500MΩ / Min
Rezistența la contact	35mΩ / max
Temperatură de lucru	-55° C ~ + 105 ° C

Application of Push button MDR14 Pin Plug SCSI Connector:

This MDR14 pin plug SCSI Solder Connector can match with Starte with standard SCSI 14 pin shielded wire. (Starte UL2990 28AWG*7 Pairs+Al-foil+Braid+Drain wire). Comatible with SCSI Servo device, SCSI Hard Disk and other PCB board which equipped with SCSI 14 conector pin feminin.