IDC kabel

  • DB9 Male to DB9 Female RS232 Touch Screen Flat Cable

    DB9 Male to DB9 Female RS232 Touch Screen Flat Cable

    Starte DB9 Male to DB9 Female RS232 Touch Screen Flat Cable has a DB9 Male D-Sub ribbon connector on one end and a DB9 Female D-Sub connector on the other end. Good for data transmission,Consumer Electronics, telecommunications measurement, regulation and control devices and Military Equipment.

  • DB9 Slot Plate to IDC 10 Pin Motherboard Header Cable

    DB9 Slot Plate to IDC 10 Pin Motherboard Header Cable

    Starte DB9 Slot Plate to IDC 10 Pin Motherboard Header Cable is constructed of quality components to ensure durability and reliability. Bracket connects the 2.54mm pitch onboard Serial Port pin headers and comes with a removable full height slot-mounting bracket if your chassis doesn’t have an opening for the same.

  • IZ 50 pin Connector Terminal PCB Breakout Board Cable

    IZ 50 pin Connector Terminal PCB Breakout Board Cable

    Starte DIN 50 pin Connector Terminal PCB Breakout Board Cable has a 2×25 50 Pins 2.54mm pitch IDC Header connector female connector on each side. Suitable for 0.1Header 2×25 50 pin IDC Breakout Board, also well-suited for PLC I/O expansion, for Omron PLC I/O expansion.

  • Napajalni kabel za razdelilnik med moškim in dvojnim USB-jem 9 pin RS232 Motherboard Com Ribbon Bracket Cable

    Napajalni kabel za razdelilnik med moškim in dvojnim USB-jem 9 pin RS232 Motherboard Com Ribbon Bracket Cable

    Starte Dual 9 pin RS232 Motherboard Com Ribbon Bracket Cable features two DB9 male connector and dual IDC 10 pin female motherboard connector, it is good for adding two DB9 serial ports to the rear panel of a computer, connecting to two IDC10 header connectors on the motherboard.

  • Dupont 2.54 wire harness 5pin male to female Cable

    Dupont 2.54 wire harness 5pin male to female Cable

    Starte Dupont 2.54 wire harness 5pin male to female Cable has a 5 pin motherboard header male connector one on side, the other side is a 2.54mm pitch 5 pin ženski konektor. Easier to connect multi-function front panels or any device that relies on internal USB ports, directly to a motherboard or expansion card that features a USB IDC (Header) connection.

  • DuPont 40 Priklopite moške na ženske žice za mostičke

    Zaženite DuPont 40 Pin Male to Female Breadboard Jumper Wires ima 0,1″ vtičnice na obeh koncih in se popolnoma prilegajo druga drugi na 0,1-stopinjski standard″ (2.54mm) glava. Žice so opremljene s 40-pinskim trakovnim kablom, ki ga lahko držite skupaj, da ga lepo organizirate, ali povlecite tračne žice, da naredite posamezne skakalce.

  • FC16P IDC 16 Podaljšajte trdo diskovno ploščo

    FC16P IDC 16 Podaljšajte trdo diskovno ploščo

    Zaženite FC16P IDC 16 Podaljšanje trdega diska z ravno žico ima dva koraka 2,0 mm 2×8 16na obeh koncih pripnite ženske IDC konektorje. Primeren je za notranje ožičenje v pisarniški opremi, avdio in video stroji,programiranje AVR-jev.

  • FC16P IDC 16 Ploski tračni kabel trdega diska

    FC16P IDC 16 Ploski tračni kabel trdega diska

    Zaženite FC16P IDC 16 Ploski tračni kabel trdega diska ima zatič 16 zatiči (2×8) v 0.1″ x 0,1″ razmik in dve vtičnici, stisnjeni na obeh straneh. Pin #1 je označena z rdečo črto ob strani. Uporablja se s pokrovom GPIO Expander ali s katero koli od Adafruit RGB LED matric, če jih želite povezati skupaj ali podaljšati kabel nekoliko dlje.

  • FRC 14 Pin ženski konektor tračni kabel

    FRC 14 Pin ženski konektor tračni kabel

    Zaženite FRC 14 Pin ženski konektor Tračni kabel za trak ima na vsaki strani 14-polni IDC trak s priključkom 2,00 mm. Zasnovan za priključitev na 1.00 višina tona 14 glava zavitega polja. Primerno za večino razhroščevalnikov Atmel AVR jtag, programerji v sistemu, isp prenos, itd.

  • IDC 34 Pin terminal block breakout board data Cable

    IDC 34 Pin terminal block breakout board data Cable

    Starte IDC 34 Pin terminal block breakout board data Cable has a 0.1Header IDC34 pin female connector on each side. Primerno za 2×17 0.1″ Header IDC34 Breakout Board. Well-suited for interfacing with I/O cards, data acquisition (DAQ) equipment, and any other device that uses a 2×17 34-position header connector.

  • IDC konektor RCP 20 POS IDT RA montažni kabel

    IDC konektor RCP 20 POS IDT RA montažni kabel

    Zaženite IDC konektor RCP 20 POS IDT RA montažni kabel ima dvojne vrstice 20-pinski ženski do 20-pinski ženski priključek na obeh koncih, združljiv z 2,54 mm razmikom glave zatičev. Uporablja se za večino razhroščevalcev Atmel AVR JTAG, programerji v sistemu, Isp prenos, itd.

  • IDC20 2 x 10 Pins Header Breakout Board Cable

    IDC20 2 x 10 Pins Header Breakout Board Cable

    Starte IDC20 2 x 10 Pins Header Breakout Board Cable has a 2.54mm pitch 2×10 20 pin header connector on each side. Suitable for most Brand Industry 4.0 automation control equipment, such as Mitsubishi, OMRON, SIMENS, AB, KEYENCE, DELTA, Panasonic, KOYO, YASKAWA, YOKOGAWA, Sanyo, Fuji.