3.3VTTLワイヤーエンドUSB-UARTTTL-232RGケーブル

3.3VTTLワイヤーエンドUSB-UARTTTL-232RGケーブル

Starte 3.3V TTL Wire End USB to UART TTL-232RG Cable is a family of USB to TTL serial UART converter cables incorporating FTDI’s FT232RQ. Provides a fast, simple way to connect devices with a TTL level serial interface to USB. Supports a data transfer rate up to 3 Mbaud. Compatible with Microsoft WHQL certified VCP drivers for Windows, Apple Mac, およびLinux.

  • 説明
  • 照会フォーム

3.3VTTLワイヤーエンドUSB-UARTTTL-232RGケーブル

Starte 3.3V TTL Wire End USB to UART TTL-232RG Cable. Also named 3.3V USB to TTL Serial Arduino ESP8266 Cable. It is a family of USB to TTL serial UART converter cables incorporating FTDI’s FT232RQ. Provides a fast, simple way to connect devices with a TTL level serial interface to USB. Supports a data transfer rate up to 3 Mbaud. Compatible with Microsoft WHQL certified VCP drivers for Windows, Apple Mac, およびLinux.

 

Product Parameters of FTDI USB to 3.3V TTL RS232 Arduino Cable:

項目 3.3VTTLワイヤーエンドUSB-UARTTTL-232RGケーブル
ブランド 開始
モデル番号. U2CA012
ケーブルタイプ USB to TTL cable
コネクタ 1 USB 2.0 オスコネクタ
コネクタ 2 2.54mm pitch connector
チップセット FTDI FT232RL
Number of Channels 1
Number of Conductors 6
Baud Rate 3 Mbaud
USBバージョン 1.1 また 2.0 準拠
外部電源 必要なし
ブラック
サンプル 許可された
MOQ 500 pcs
保証 2年
OEM サポート

https://www.starte-e.net/product-category/usb-2-0-cable/usb-2-0-to-serial-adapter-cable/

 

の特徴 USB to RS232 levels serial UART converter cable

1)Connect directly to a micro controller UART or I/O pins. +3.3V TTL output allows external logic to be powered from the USB port

2)USB to UART cable with +5V TTL level UART signals. Wire ended output allow most flexible connection

3)Over molded FT232R provides single chip USB to asynchronous serial data transfer interface.

4)6 outputs provide Tx, Rx, RTS#, CTS#, VCC and GND. Data transfer rates from 300 baud to 3 Mbaud at TTL levels

5)Replace MAX232 type level shifters allowing for direct connection of products to PC via USB

6)Compatible with Microsoft WHQL certified VCP drivers for Windows, Apple Mac, およびLinux.

 

の適用 FTDI USB UART TTL 3.3v stripped open Cable:

This 3.3V TTL Wire End USB to UART TTL-232RG Cable is used to connect devices with a TTL level serial interface to USB. Support a data transfer rate up to 3 Mbaud.

 

お問い合わせ