Starte provide all kinds of SCSI Connector, such as SCSI 20/26/36/50/68/100 and VHDCI 68 for cable and PCB
-
Read MoreQuick View
10150 MDR50 Pin Servo Drive Connector
Starte 10150 MDR50 Pin Servo Drive Connector with latch clip and plastic hood is replacement of 3M Mini Delta Ribbon 10150-3000PE MDR and 10350-52F0-008 MDR50 pin connector. Used to make HPCN 50 pin male to male cable with latch clip, then onnect servo Driver, SCSI Card and Motion Controller.
-
Read MoreQuick View
26 pin 0.8mm pitch VHDCI SCSI Connector
Starte 26 pin 0.8mm pitch VHDCI SCSI Connector with metal hood pin arrangement is in two rows, each row has 13 pins. It is used on the Industrial equipment PCB or PCI break out board with VHDCI 26 pin female connector.
-
Read MoreQuick View
36 Pin SCSI MDR Wire Mount Male Connector
Starte 36 Pin SCSI MDR Wire Mount Male Connector pin arrangement is in two rows, each row has 18 pins. This type MDR36 pin connector is similar with 3M Mini Delta Ribbon 36 pin connector, and commonly used to make MDR36 pin cable, then link SCSI 36 Pin Servo Connectors Terminal Blocks Breakout Board and parallel printers.
-
Read MoreQuick View
3M 10326 SCSI CN 26 Pin Solder Connector
Starte 3M 10326 SCSI CN 26 Pin Solder Connector with Screw is solder type and locked by thumbscrew, not latch clip. This MDR26 pin SCSI cable Connector is always used with Standard SCSI MDR36 pin shielded wire(Starte UL2990 28AWG*13Pairs+Al-foil+Braid+Drain wire), and used to link SCSI Servo Data Device which equipped with MDR 26 pin female connector.
-
Read MoreQuick View
90 degree 68 Pin SCSI Solder Connector
This 90 degree angled High density 68 pin SCSI Male Connector include Solder Type 68 pin SCSI Male Connector and right angle 68 pin SCSI Connector metal cover with latch clip. Used to make 90 degree SCSI 68 pin cable. Compatible with industrial and power control, medical equipment, automotive electronics.
-
Read MoreQuick View
90 degree MDR36 Pin Female Connector
Starte 90 degree 10236-5212PL MDR36 Pin Female Connector with latch bracket has a 0.050 inch (1.27 mm) pitch, and has 18 pins arrangement in two rows. This DIP type MDR36 pin female connector is often used on SCSI CN 36 Pin Servo Breakout Board. Compatible with Parallel Printer Device.
-
Read MoreQuick View
90 degree MDR50 pin male SCSI Cable Connector
Starte 90 degree MDR50 pin male SCSI Cable Connector with Latch Clip metal hood. This 90 degree IDC type SCSI MDR 50 Pin Cable Connector with latch clip is a type of MDR50 pin SCSI Connector and locked by latch clip. Always made with standard SCSI 50 pin shielded wire (Starte UL2990 28AWG*25Pairs+Al-foil+Drain wire+Braid, copper). Then connect SCSI Hard Disk Drive with CN50 female connector or Motion Controller with CN50 female connector.
-
Read MoreQuick View
90 degree VHDCI 26Pin Female SCSI PCB Connector
Starte 90 degree VHDCI 26Pin Female SCSI PCB Connector is 1.0mm pitch VHDCI connector, not common 0.80mm pitch VHDCI Connector, commonly used on communications industry and Telecom Industry.
-
Read MoreQuick View
DB 68 pin SCSI Solder Connector with screw
Starte DB 68 pin SCSI Solder Connector with screw and metal hood. This Solder type DB 68 pin SCSI Connector with Screw is usually sued with Starte Standard 68 PIN SCSI shielded wires, then linked with Mass storage machines,PCs and Macs and more peripherals.
-
Read MoreQuick View
HPCN 100 pin SCSI-II Connector with Metal Cover
Starte HPCN 100 pin SCSI-II Connector with Metal Cover is always used with standard SCSI 100 pin shielded wire to make a 100 pin SCSI Cable assembly. Then link USB Modular Digital I/O module with SCSI interface, 100 Pin SCSI-II Screw Terminal Block.