USB 2.0 to Serial Adapter Cable

  • http://www.starte-e.net/product-category/usb-2-0-cable/usb-2-0-to-serial-adapter-cable/

    3.3V TTL Wire End USB to UART TTL-232RG Cable

    Starte 3.3V TTL Wire End USB to UART TTL-232RG Cable is a family of USB to TTL serial UART converter cables incorporating FTDI’s FT232RQ. Provides a fast, simple way to connect devices with a TTL level serial interface to USB. Supports a data transfer rate up to 3 Mbaud. Compatible with Microsoft WHQL certified VCP drivers for Windows, Apple Mac, and Linux.

  • 6 Way Header USB to TTL 5V UART Converter Cable

    6 Way Header USB to TTL 5V UART Converter Cable

    Starte 6 Way Header USB to TTL 5V UART Converter Cable has a +5V output powered from the USB Type-A port, use a 6-pin TTL header connector interface for your serial communications. LED’s activity lights located in the translucent USB jacket lets you know power and signal is active. Suitable for UHCI / OHCI / EHCI host controller.

  • FTDI RS232 USB to RJ45 Serial Console Rollover Cable

    FTDI RS232 USB to RJ45 Serial Console Rollover Cable

    Starte FTDI RS232 USB to RJ45 Serial Console Rollover Cable is for updating DB9 to RJ45 cable, Full support for MAC, Windows, and Linux. No CD needed. the drivers will be installed automatically on Win7, Win8, Win8.1 and Win10 computer/laptop, good for Cisco router, switch and firewall configuration.

  • Network Routers FTDI USB to RJ45 Serial Cable

    Network Routers FTDI USB to RJ45 Serial Cable

    Starte Network Routers FTDI USB to RJ45 Serial Cable contains FTDI FT232R and incorporates a ZT213 RS232 level shifter to realize true RS232 levels. Used to connect a PC/Laptop directly to a console port for Cisco, Juniper or similar router. Compatible with USB 2.0 and USB 1.1, Supports Data Transfer of up to 500Kbps.

  • USB to 3.3V 5V Serial UART TTL Auto Sensing Cable

    USB to 3.3V 5V Serial UART TTL Auto Sensing Cable

    Starte USB to 3.3V 5V Serial UART TTL Auto Sensing Cable is a USB to 5 Pin TTL Header assigned cable, which can be used to direct connection to the board from the USB Bus. Support electronics automatically sense the voltage for its operation. Transmit and receive LED lights are embedded into the translucent USB molded jacket.

  • USB to 3.3v TTL Header to 3.5mm Audio Serial Cable

    USB to 3.3v TTL Header to 3.5mm Audio Serial Cable

    Starte USB to 3.3v TTL Header to 3.5mm Audio Serial Cable is a 3.3v Level TTL signal cable with FTDI chipset (Not RS232). Common headphone cable, terminated with a 3.5mm audio jack connector which provides access to the TX, RX and GND signals. Works for Galileo Gen2 Boards/BeagleBone Black/Minnowboard Max and more.

  • USB to TTL 232R 5V FTDI Open Tinned Wired End

    USB to TTL 232R 5V FTDI Open Tinned Wired End

    Starte USB to TTL 232R 5V FTDI Open Tinned Wired End. Also named USB to TTL Serial Converter 5V Wire End Cable.The USB connector contains a small circuit board featuring the FTDI FT232RQ serial UART interface IC to handle all the USB signalling and protocols. Supported with Microsoft WHQL certified VCP drivers for Windows, Apple Mac, and Linux. Provides data transfer rates from 300baud to 3Mbaud at TTL levels.

  • USB Type-C to RJ45 Network Lan Router Switcher Cable

    USB Type-C to RJ45 Network Lan Router Switcher Cable

    Starte USB Type-C to RJ45 Network Lan Router Switcher Cable can connect from a Type C USB port on your laptop / PC directly to a Cisco console port, no adapter is required. Comptable with branded routers, switches, firewalls and wireless LAN controllers with CONSOLE port, such as Cisco, Ubiquiti, Juniper, Fortigate, Mikrotik, TP-Link, Huawei, HP ProCurve devices and more.

Online Service
Live Chat