HPCN 68 Pin Male Straight IDC SCSI Connector
Starte HPCN 68 Pin Male Straight IDC SCSI Connector is used to connect with standard SCSI 68 pin shielded wires. Then link with servo driver, SCSI Hard Driver, SCSI motion Controller and SCSI breakout Board. You can choose locked with Screw or Latch clip as your requirements. Starte provide Mould type CN68 pin SCSI cable with screw or Mould type CN68 pin SCSI cable with Latch clip for your options.
- Description
- Inquery Form
HPCN 68 Pin Male Straight IDC SCSI Connector
Starte HPCN 68 Pin Male Straight IDC SCSI Connector. 1.27 spacing 68 positions IDC type SCSI Cable Connector is used to connect with SCSI 68 pin shielded wires. Then link with servo driver, SCSI Hard Driver, SCSI motion Controller and SCSI breakout Board. You can choose locked with Screw or Latch clip as your requirements. Starte provide Mould type CN68 pin SCSI cable with screw or Mould type CN68 pin SCSI cable with Latch clip for your options.
Product Parameters of 0.50 Series HPCN 68 pin SCSI Ⅲ IDC Connector:
Item | HPCN 68 Pin Male Straight IDC SCSI Connector |
Brand | Starte |
Model No. | SCCF011 |
Product type | 68 Pin SCSI Cable Connector |
No. Of Contact | 68 pin |
Contact Type | 1.27mm cable receptacles Connector idc type |
Options | Male, for molding |
Wire | 28AWG or 30AWG support |
Contact Finishes | Gold Selective Plating |
MOQ | 1 PCS |
Sample | Free |
Package | Bags |
Warranty | Two years |
Technical Parameters of 1.27mm Crimp CN68 pin SCSI Cable Connector:
Connector Material | |
Housing | Plastic Thermoplastic P.B.T UL94V-0, Black |
Contacts | Copper Alloy Gold Selective Plated |
Front Shell | Steel, Nickel Plated Over Copper |
Cover&Holder | Plastic Thermoplastic P.B.T UL94V-0, Black |
Inner Shell | Steel, Nickel Plated Over Copper |
Electrical Characterisitics | |
Contact Current Rating | 1.0 Amp |
Dielectric Withstanding Voltage | 500V AC |
Insulation Resistance | 500MΩ/ Min |
Contact Resistance | 35mΩ /Max |
Operation Temperature | -55°C~+105°C |
Application of IDC type 1.27mm MDR68 Pin SCSI Cable Connector:
This HPCN 68 Pin Male Straight IDC SCSI Connector is used to connect with standard SCSI 68 pin shielded wires. Then link with servo driver, SCSI Hard Driver, SCSI motion Controller and SCSI breakout Board.