40 pin PLC module IDC breakout board Data Cable
Starte 40 pin PLC module IDC breakout board Data Cable has a 2×20 40 Pins Header connector female connector on each side. It is suitable for 0.1″ Header 2×20 IDC 40 pin Breakout Board, also well-suited for interfacing with I/O cards, data acquisition (DAQ) equipment.
- Description
- Inquery Form
40 pin PLC module IDC breakout board Data Cable
Starte 40 pin PLC module IDC breakout board Data Cable. Also named 2×20 0.1″ Header IDC40 Breakout Board Cable. It has a 2×20 40 Pins Header connector female connector on each side. It is suitable for 0.1″ Header 2×20 IDC 40 pin Breakout Board, also well-suited for interfacing with I/O cards, data acquisition (DAQ) equipment.
Product Parameters of 2×20 40 pin IDC Power System Data Cable :
| Item | 40 pin PLC module IDC breakout board Data Cable |
| Brand | Starte |
| Model No. | RIDC008 |
| Cable Type | Round IDC Cable |
| Connector 1 | 0.1″ Header IDC40 pin connector |
| Connector 2 | 2×20 40 Pins Header connector |
| Gender | Female to female |
| Wire | UL- list 28AWG or 30AWG |
| Conductor | Copper |
| Cable spacing | 2.54mm allowed |
| Application | Breakout Board, Terminal Block |
| Sample | Allowed |
| MOQ | 100 pcs |
| Package | PE bags |
| Warranty | Two years |
| OEM | Support |
Feature of 40 pin I/O PLC Automation Direct Cable:
1)Half Pitch IDC40 female to female connectors on both ends.
2)Connector: 40 Pins (2 x 17) 0.1″ pitch
3)Great for Raspberry Pi users with 40-pin GPIOs.
4)Suitable for 0.1″ Header 2×20 IDC 40 pin Breakout Board.
Application of IDC40 40 pin Connector Breakout Board Cable:
This 40 pin PLC module IDC breakout board Data Cable is suitable for 0.1″ Header 2×20 IDC 40 pin Breakout Board, also well-suited for interfacing with I/O cards, data acquisition (DAQ) equipment.
Related Products
-
Read MoreQuick View64 Pin Female Connector Hard Drive Ribbon Cable
Starte 64 Pin Female Connector Hard Drive Ribbon Cable has two 2.54mm pitch 2x32Pin female IDC connectors on each end. Allows to extend standard idc 64-pin cable and can also be used for additional applications, such as hard drive, motherboard, CD, dvc, hdd, cdrw and dvcrw.
-
Read MoreQuick ViewFC16P IDC 16 Pin Hard Drive Flat Ribbon Cable
Starte FC16P IDC 16 Pin Hard Drive Flat Ribbon Cable has 16 pins (2×8) in 0.1″ x 0.1″ spacing and two sockets crimped on either end. Pin #1 is marked with a red stripe down the side. Used with GPIO Expander bonnet or with any of Adafruit RGB LED Matrices if you want to chain them together or extend the cable a little farther.
-
Read MoreQuick View14 Pin to 14Pin 2.54mm Pitch IDC Flat Ribbon Cable
Starte 14 Pin to 14Pin 2.54mm Pitch IDC Flat Ribbon Cable features one 2×7 14-pin male connector on one end and a 2×7 14-pin female connector on the other end. Used for ASP, ISP, JTAG, AVR, in-system programmers, various automation units, or any other applications that requires 14-pin (2×7) ribbon/ IDC cable extension.
-
Read MoreQuick View20 Pin Female To Female FRC Connector Cable
Starte 20 Pin Female To Female FRC Connector Cable features two 1.27mm pitch 2x10pin female IDC connectors on each end. Used to connect the ATMEL-ICE debugger to the adapter for programming or debugging the AVR chip with a 1.27 pitch connector.
-
Read MoreQuick ViewSecure Locking 16 Ways Robotics IDC Ribbon Cable
Starte Secure Locking 16 Ways Robotics IDC Ribbon Cable features two 1.27mm pitch 2x10pin female IDC connectors on each end. Used to connect the ATMEL-ICE debugger to the adapter for programming or debugging the AVR chip with a 1.27 pitch connector.
-
Read MoreQuick View1mm Pitch 2×6 12 Pin 12 Wire IDC Flat Ribbon Cable
Starte 1mm Pitch 2×6 12 Pin 12 Wire IDC Flat Ribbon Cable has a 1.0mm pitch 2×6 12pin IDC female connector on each side. Designed to plug into a 1.00 pitch 12 pin shrouded box header. Suitable for most Atmel AVR jtag debuggers, in-system programmers, isp download, etc.
-
Read MoreQuick ViewDuPont 40 Pin Male to Female Breadboard Jumper Wires
Starte DuPont 40 Pin Male to Female Breadboard Jumper Wires has 0.1″ sockets on either end and fit cleanly next to each other on standard-pitch 0.1″ (2.54mm) header. Wires come in a 40-pin ribbon cable which you can either keep them together to neatly organize, or pull the ribbon wires off to make individual jumpers.
-
Read MoreQuick ViewFRC 14 Pin Female connector Ribbon Header Cable
Starte FRC 14 Pin Female connector Ribbon Header Cable has a 14pin IDC 2.00mm pitch ribbon connector on each side. Designed to plug into a 1.00 pitch 14 pin shrouded box header. Suitable for most Atmel AVR jtag debuggers, in-system programmers, isp download, etc.
-
Read MoreQuick ViewRAS PI 26P GPIO Rainbow IDC Flat Ribbon Cable
Starte RAS PI 26P GPIO Rainbow IDC Flat Ribbon Cable features two 1.27mm pitch 26 pin female IDC connectors on each end. Used to fit the GPIO headers on the Raspberry Pi so you can easily connect to the low-level peripherals and get hacking!
-
Read MoreQuick ViewFC16P IDC 16 Pin Hard Drive Extension Flat Wire
Starte FC16P IDC 16 Pin Hard Drive Extension Flat Wire has two 2.0mm pitch 2×8 16pin female IDC connectors on each end. It is Suitable for internal wiring in office equipment, audio and video machines,programming AVRs.