IDC 34 Pin terminal block breakout board data Cable
Starte IDC 34 Pin terminal block breakout board data Cable has a 0.1″ Header IDC34 pin female connector on each side. Suitable for 2×17 0.1″ Header IDC34 Breakout Board. Well-suited for interfacing with I/O cards, data acquisition (DAQ) equipment, and any other device that uses a 2×17 34-position header connector.
- Description
- Inquery Form
IDC 34 Pin terminal block breakout board data Cable
Starte IDC 34 Pin terminal block breakout board data Cable. Aso named IDC34 terminal block breakout board Cable. It has a 0.1″ Header IDC34 pin female connector on each side. Suitable for 2×17 0.1″ Header IDC34 Breakout Board. Well-suited for interfacing with I/O cards, data acquisition (DAQ) equipment, and any other device that uses a 2×17 34-position header connector.
Product Parameters of IDC34 pin Power System Data Cable:
| Item | IDC 34 Pin terminal block breakout board data Cable |
| Brand | Starte |
| Model No. | RIDC007 |
| Cable Type | Round IDC Cable |
| Connector 1 | 0.1″ Header IDC34 pin connector |
| Connector 2 | 2×17 34 Pins Header connector |
| Gender | Female to female |
| Wire | UL- list 28AWG or 30AWG |
| Conductor | Copper |
| Cable spacing | 2.54mm allowed |
| Application | Breakout Board, Terminal Block |
| Sample | Allowed |
| MOQ | 100 pcs |
| Package | PE bags |
| Warranty | Two years |
| OEM | Support |
Feature of 0.1″ Header IDC34 Breakout Board Cable:
1)Half Pitch IDC34 female to female connectors on both ends.
2)Connector: 34 Pins (2 x 17) 0.1″ pitch
3)Feature screw tight gold-plated connectors on 34 twisted pairs for superior data transfer.
4)well-suited for interfacing with I/O cards, data acquisition (DAQ) equipment, and any other device that uses a 2×17 34-position header connector.
Application of IDC 34 pin Floppy Disk Drive Data Cable:
This IDC 34 Pin terminal block breakout board data Cable is well-suited for interfacing with I/O cards, data acquisition (DAQ) equipment, and any other device that uses a 2×17 34-position header connector.
Related Products
-
Read MoreQuick ViewRaspberry Pi 26 pin GPIO Ribbon Breadboard Cable
Starte Raspberry Pi 26 pin GPIO Ribbon Breadboard Cable features two 1.27mm pitch 40 pin female IDC connectors on each end. Widely used for extending input and output port. Compatible with for Banana Pi/ Orange Pi 2/ 3. 40 Pin Interface ensure good contacts and suitability, meet your extending requirements.
-
Read MoreQuick ViewFC16P IDC 16 Pin Hard Drive Flat Ribbon Cable
Starte FC16P IDC 16 Pin Hard Drive Flat Ribbon Cable has 16 pins (2×8) in 0.1″ x 0.1″ spacing and two sockets crimped on either end. Pin #1 is marked with a red stripe down the side. Used with GPIO Expander bonnet or with any of Adafruit RGB LED Matrices if you want to chain them together or extend the cable a little farther.
-
Read MoreQuick View2.54mm 2×12 24 pin female IDC motherboard Cable
Starte 2.54mm 2×12 24 pin female IDC motherboard Cable has two 2.54mm pitch 2×12 24 pin female IDC connectors on each end. It is commonly used in office equipment, audio and video machines.
-
Read MoreQuick ViewFC16P IDC 16 Pin Hard Drive Extension Flat Wire
Starte FC16P IDC 16 Pin Hard Drive Extension Flat Wire has two 2.0mm pitch 2×8 16pin female IDC connectors on each end. It is Suitable for internal wiring in office equipment, audio and video machines,programming AVRs.
-
Read MoreQuick ViewPitch 2.54mm 2×6 Pin 12 Pin Female IDC Flat Cable
Starte Pitch 2.54mm 2×6 Pin 12 Pin Female IDC Flat Cable features one 12-pin (2×6) connector on one end and one 12-pin (2×6) connector on the other end. Used for AVR programming, general communication, and all around handy-ness.
-
Read MoreQuick View2.54mm Pitch IDC 20 Pin female Connector Flat Cable
Starte 2.54mm Pitch IDC 20 Pin female Connector Flat Cable has two 2.54mm pitch 2x10pin female IDC connectors on each end. Commonly used in various computers, instruments, machines, automobiles, color TVs, air conditioners, LED displays.
-
Read MoreQuick ViewIDC Connector RCP 20 POS IDT RA Mount Cable
Starte IDC Connector RCP 20 POS IDT RA Mount Cable has Double rows 20pin female to 20pin female header with both end, compatible with 2.54mm spacing pin headers. Used for most Atmel AVR JTAG debuggers, in-system programmers, Isp download, etc.
-
Read MoreQuick ViewRAS PI 26P GPIO Rainbow IDC Flat Ribbon Cable
Starte RAS PI 26P GPIO Rainbow IDC Flat Ribbon Cable features two 1.27mm pitch 26 pin female IDC connectors on each end. Used to fit the GPIO headers on the Raspberry Pi so you can easily connect to the low-level peripherals and get hacking!
-
Read MoreQuick View14 Pin to 14Pin 2.54mm Pitch IDC Flat Ribbon Cable
Starte 14 Pin to 14Pin 2.54mm Pitch IDC Flat Ribbon Cable features one 2×7 14-pin male connector on one end and a 2×7 14-pin female connector on the other end. Used for ASP, ISP, JTAG, AVR, in-system programmers, various automation units, or any other applications that requires 14-pin (2×7) ribbon/ IDC cable extension.
-
Read MoreQuick View40Pin GPIO Breakout Board Rainbow Cable
Starte 40Pin GPIO Breakout Board Rainbow Cable features 2.54mm pitch IDC 40 pin female connector on each end. Widely used for extending input and output port. Ideal for breaking out your Raspberry Pi’s 40-pin header for quick and easy experimentation.